🇮🇳 Made for Indian taxpayers & salaried employees AboutContact
🗺️

Indian Land Area Converter: Bigha, Biswa, Acre, Guntha and Square Feet

Tools Guide

✓ Tax rules verified: November 2026 · FY 2026-27

Land measurements in India combine standard metric and imperial units with traditional regional units. A property may be described in square feet, square yards, square metres, acres, hectares, bigha, biswa, guntha or cent depending on local practice. An area converter makes arithmetic easier, but traditional units do not always have one nationwide definition. The state, district and local revenue convention must be known before converting a traditional measurement.

How the calculation works

Standard units have fixed relationships. One acre is approximately 4,046.8564224 square metres or 43,560 square feet. One hectare equals 10,000 square metres. One square yard equals nine square feet. For standard units, multiply or divide by the appropriate fixed factor. For bigha, biswa and other regional units, use the local conversion standard rather than assuming a universal value.

Conversion formulas: Area in square feet = acres × 43,560  |  Area in square yards = acres × 4,840  |  Area in square metres = acres × 4,046.86  |  Area in hectares = square metres ÷ 10,000. Here acres is the area in acres, square feet / square yards / square metres are the same area in those units, and hectares is the area in hectares (1 hectare = 10,000 square metres = 2.471 acres). Also: 1 square yard = 9 square feet and 1 square metre = 10.764 square feet.

Worked example

A rectangular plot measuring 30 feet by 40 feet has an area of 1,200 square feet, or about 133.33 square yards. This is a simple geometric calculation, not proof of legal area or ownership. If a plot has angled or irregular boundaries, multiplying the longest length by the widest width may overstate or understate its area. A surveyor may need to measure the boundaries and calculate the actual shape.

2 acres converted toConversion usedResult
Square feet2 × 43,56087,120 sq ft
Square yards2 × 4,8409,680 sq yd
Square metres2 × 4,046.868,094 sq m
Hectares8,093.71 ÷ 10,0000.809 hectares

Read the table row by row: each row starts from the same 2 acres and applies one fixed conversion factor, so all four results describe the same plot. The square-metre figure is 8,093.71 before rounding, shown as 8,094, and the hectare figure is 0.809371 before rounding, shown as 0.809. Bigha, biswa and guntha are not in this table because they vary by state and locality — as noted above, a commonly used relationship in some areas is 40 gunthas per acre, but the local value must be confirmed from local revenue records before converting a traditional measurement.

Important points to understand

Bigha and biswa values vary by region and sometimes local practice. A converter should ask for the state or locality or clearly disclose the conversion standard.

Guntha is used in several regions. A commonly used relationship in some areas is 40 gunthas per acre, but local records should be checked.

Cent is commonly defined as one-hundredth of an acre in regions where the unit is used. Ground and other local units also require the relevant regional standard.

Convert competing property quotations to one standard unit before comparing rates. One square yard contains nine square feet.

Land area and land value are different. Location, access, zoning, shape, title, utilities and restrictions affect price.

Revenue records may use a different unit from a broker's description. Retain the original recorded value and document the conversion factor.

Before a transaction, verify survey number, boundaries, title chain, encumbrances, land-use status and any required permissions.

A calculator cannot verify legal ownership, boundaries or whether the physical plot matches the sale deed. Obtain official records and a qualified survey where needed.

How to use the calculator carefully

Begin by identifying exactly what you want to know. Read the input labels and check whether an amount is monthly or annual, whether a rate is entered as a percentage or decimal, and whether the result is an estimate or a formal value. Use figures from the relevant document wherever possible. Avoid mixing values from different dates or different offers. After entering the data, inspect the component breakdown rather than copying only the final number. If the result looks surprising, change one input at a time and see how the output responds. This simple check can reveal a misplaced decimal, an incorrect unit or an assumption that does not match your situation.

For comparisons, keep every input identical except the factor you want to test. For example, compare two tenures at the same principal and rate, or compare two offers at the same amount and period. Write down the assumptions beside each result. This makes it possible to reproduce the comparison later and prevents a scenario from being mistaken for a confirmed offer, official assessment or professional recommendation.

Common errors to avoid

A frequent error is entering a correct number in the wrong unit. Annual values, monthly values, percentages, decimals, metres, centimetres and square feet are not interchangeable. Another error is using an outdated rule or rate. A calculator can return a precise-looking answer even when the input is wrong, so precision on the screen should never be confused with certainty. Check the source of every important input and confirm the date to which it applies.

It is also easy to overlook charges, conditions or personal circumstances that a basic calculator does not ask about. A result may exclude fees, taxes, penalties, exemptions, eligibility conditions or local variations. Read the assumptions and limitations shown on the tool's page. If the decision has legal, tax, health or substantial financial consequences, verify the result with an authoritative source or a qualified professional before acting.

Frequently Asked Questions

Is one bigha the same size everywhere?

No. Bigha and related traditional units vary by region and sometimes by local practice.

How many square feet are in an acre?

One international acre is approximately 43,560 square feet.

Can an irregular plot be calculated from length and width?

Not reliably unless it is rectangular. A survey may be required.

Does converted area prove ownership?

No. Conversion is arithmetic and does not establish title, boundaries or legal status.

Final thoughts

A calculator is most valuable when it helps you understand a decision, compare realistic alternatives and ask better questions. It should make the underlying method clearer rather than hide it behind a single output. Keep the original inputs, note the assumptions and revisit the result when the relevant rules or circumstances change. For important decisions, use the calculator as a first check and confirm the final position with the official document, institution or professional responsible for the matter.

A further real-world consideration

A rectangular plot measuring 30 feet by 40 feet has an area of 1,200 square feet, or about 133.33 square yards. This is a simple geometric calculation, not proof of legal area or ownership. If a plot has angled or irregular boundaries, multiplying the longest length by the widest width may overstate or understate its area. A surveyor may need to measure the boundaries and calculate the actual shape.

A sensible next step is to keep a record of the assumptions used and compare the result with the relevant original document. If a figure comes from an advertisement, confirm that the offer is still valid and that its conditions apply to you. If a figure comes from a government rule, check the current notification and effective date. If it comes from a bank, employer, school, seller or service provider, request the written terms. The calculator can check the arithmetic, but it cannot independently authenticate a quotation, document, identity, eligibility condition or legal status. Treat any result as provisional until the source information has been verified.

Verifying a plot before using a converted area

A converted area should always be traceable to the original measurement and the conversion factor used. Keep the original unit, the local definition and the standard-unit result together. If a broker gives an area in a traditional unit, ask which local standard is being applied and compare it with the revenue record. This is especially important where the same unit name has different values across districts or states.

For a purchase, compare the sale deed, survey sketch and physical boundary measurement. Check whether the quoted area is gross plot area or excludes a road, easement or shared portion. A small conversion difference can become financially significant when multiplied by a high per-unit price. Obtain professional measurement and legal verification rather than using a web calculator as proof of the area being conveyed.

IC

IndianCalculator Editorial Team

Writing practical, plain-English guides on Indian tax and personal finance.

Related reading