Tools Guide
✓ Tax rules verified: November 2026 · FY 2026-27
Percentages appear in exam marks, discounts, salary increases, taxes, business reports and everyday comparisons. Percent means per hundred. A percentage expresses one value as a proportion of a reference amount. A calculator can solve the arithmetic quickly, but the most important step is identifying the correct base. The same ₹200 difference can represent a large or small percentage depending on the amount against which it is measured.
To find a percentage of a number, multiply the number by the percentage and divide by 100. To find what percentage one number is of another, divide the part by the whole and multiply by 100. Percentage change is (new value − original value) ÷ original value × 100. For a reverse percentage, divide the final amount by the remaining percentage expressed as a decimal. These formulas answer different questions, so select the right calculator mode.
A product marked at ₹1,000 receives a 20% discount, reducing it to ₹800. A further 10% discount on the reduced amount removes ₹80, leaving ₹720. The combined reduction is ₹280, or 28% of the original price, not 30%. This is why successive discounts should be applied in sequence rather than added together. The same principle matters for repeated price increases and decreases.
| Example | Calculation | Result |
|---|---|---|
| Marks: 45 out of 60 | (45 ÷ 60) × 100 | 75% |
| Price rise: ₹800 to ₹920 | ((920 − 800) ÷ 800) × 100 | 15% increase |
| 20% of ₹2,500 | 2,500 × 20 ÷ 100 | ₹500 |
| Salary hike: ₹50,000 + 12% | 50,000 × 1.12 (increase ₹6,000) | ₹56,000 |
| Reverse: ₹720 is 80% of what? | 720 ÷ 0.80 | ₹900 |
| Successive discounts: ₹1,000, −20% then −10% | 1,000 × 0.80 = 800; 800 × 0.90 = 720 | ₹720 (28% off in total) |
Read the table by matching each row to the question it answers: the marks row finds a percentage of a total, the price-rise row finds a percentage change, the salary row finds a new value after a percentage increase, and the reverse row recovers the whole from a part. The last row repeats this article’s own discount example — the two discounts are applied in sequence, so the combined reduction is ₹280, or 28% of the original ₹1,000, not 30%.
Percentage increase uses the original amount as the base. Dividing by the new amount answers a different question.
Percentage points describe the direct difference between two percentages. A rate moving from 5% to 7% rises by 2 percentage points, or 40% relative to the original rate.
Markup is profit divided by cost, while margin is profit divided by selling price. They use different bases and produce different percentages.
Exam percentages may be subject to institution-specific grade conversion or credit-weighted rules. A simple marks calculator cannot replace the official method.
Discounts and GST may be applied in a specified order under the transaction rules. A general percentage calculator does not determine tax treatment.
Enter a percentage such as 15 in a percent field unless the calculator asks for a decimal such as 0.15.
Do not round too early. Keep sufficient precision through the calculation and round the final result according to the context.
Whenever you share a percentage, state the base amount and the period being compared so the result can be interpreted correctly.
Begin by identifying exactly what you want to know. Read the input labels and check whether an amount is monthly or annual, whether a rate is entered as a percentage or decimal, and whether the result is an estimate or a formal value. Use figures from the relevant document wherever possible. Avoid mixing values from different dates or different offers. After entering the data, inspect the component breakdown rather than copying only the final number. If the result looks surprising, change one input at a time and see how the output responds. This simple check can reveal a misplaced decimal, an incorrect unit or an assumption that does not match your situation.
For comparisons, keep every input identical except the factor you want to test. For example, compare two tenures at the same principal and rate, or compare two offers at the same amount and period. Write down the assumptions beside each result. This makes it possible to reproduce the comparison later and prevents a scenario from being mistaken for a confirmed offer, official assessment or professional recommendation.
A frequent error is entering a correct number in the wrong unit. Annual values, monthly values, percentages, decimals, metres, centimetres and square feet are not interchangeable. Another error is using an outdated rule or rate. A calculator can return a precise-looking answer even when the input is wrong, so precision on the screen should never be confused with certainty. Check the source of every important input and confirm the date to which it applies.
It is also easy to overlook charges, conditions or personal circumstances that a basic calculator does not ask about. A result may exclude fees, taxes, penalties, exemptions, eligibility conditions or local variations. Read the assumptions and limitations shown on the tool's page. If the decision has legal, tax, health or substantial financial consequences, verify the result with an authoritative source or a qualified professional before acting.
Divide the increase by the original value and multiply by 100.
No. The second discount is applied to the reduced price, so the combined discount is 28%.
Percent describes relative change; percentage points describe the direct difference between two percentage values.
A percentage is a proportion of a reference amount. Changing the base changes the result.
A calculator is most valuable when it helps you understand a decision, compare realistic alternatives and ask better questions. It should make the underlying method clearer rather than hide it behind a single output. Keep the original inputs, note the assumptions and revisit the result when the relevant rules or circumstances change. For important decisions, use the calculator as a first check and confirm the final position with the official document, institution or professional responsible for the matter.
A product marked at ₹1,000 receives a 20% discount, reducing it to ₹800. A further 10% discount on the reduced amount removes ₹80, leaving ₹720. The combined reduction is ₹280, or 28% of the original price, not 30%. This is why successive discounts should be applied in sequence rather than added together. The same principle matters for repeated price increases and decreases.
A sensible next step is to keep a record of the assumptions used and compare the result with the relevant original document. If a figure comes from an advertisement, confirm that the offer is still valid and that its conditions apply to you. If a figure comes from a government rule, check the current notification and effective date. If it comes from a bank, employer, school, seller or service provider, request the written terms. The calculator can check the arithmetic, but it cannot independently authenticate a quotation, document, identity, eligibility condition or legal status. Treat any result as provisional until the source information has been verified.
When a percentage is used in a report, state the numerator, denominator and period. For example, saying that sales grew by 12% is clearer when the report also states the previous-period sales and current-period sales. If the comparison uses different time periods or a changed customer base, explain that context. Percentages can make comparisons easier, but they can also hide a small underlying sample or a change in the way data was collected.
For marks, salaries and business performance, check whether the institution or organisation uses a prescribed method. Rounding, weighting and exclusions can affect the official figure. Keep unrounded values until the final step and label the result as an estimate if the source data is incomplete. A calculator can verify the arithmetic, but the report should explain what the number actually measures.